7.3 VIDEO CONNECTIONS
| BNC composite video |
| Sync. Input |
|
|
|
|
| Video output | Video output |
| ||||||||||||||
| Y/C 4 pin connector or |
|
|
|
|
|
|
| 1 |
|
|
|
|
| 2 |
|
|
|
|
|
|
| |||
| Balanced 4 pin connector |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| (selectable via PC software) |
|
|
|
|
|
|
| 3 | 4 |
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||
|
|
|
|
|
|
|
|
|
| + |
|
|
|
|
|
|
| – |
|
|
|
| |||
7.4 SYNCHRONIZATION |
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||
|
|
|
|
| Y/C OUT/ Balanced | CVBS OUT |
|
| |||||||||||||||||
CONNECTION (SYNC) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
The vertical and horizontal camera |
|
| RS232 4 |
|
|
|
| ||||||||||||||||||
synchronization signals can be generated: |
|
| Ground | N. C. Rx Tx | Mode switch |
|
|
|
| ||||||||||||||||
• | internal |
|
|
|
|
|
| ||||||||||||||||||
• | by the mains supply or the AC low | 5 | 4 | 3 |
| 2 | 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
• | voltage supply (50/60 Hz); | 9 |
| 8 |
| 7 |
| 6 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||
by a video signal from an external |
|
| C. | C. | C. | C. |
|
|
|
|
|
|
| ||||||||||||
|
| N. | N. | N. | N. |
|
|
|
| ||||||||||||||||
| source (PAL/NTSC), sync input |
|
|
|
|
|
| ||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
• | BNC ; |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
by a synchronization signal from an external source, sync input BNC . |
|
|
|
|
The camera automatically configures for the applied external synchronisation. For adjustment see chapter 9.
7.5 REMOTE CONTROL CONNECTION (RS-232)
The camera can be set up using an optional Windows based PC software tool. This product can be ordered separately.
Functions available with this software tool are:AGC manual,Automatic. Electronic Light Control (ELC). Dynamic Contrast. Gamma/Compression/Contour, OSD remainder text, Camera
= Rx, Pin 2 = Tx, Pin 5 = GND | |
pin 4,6,8,9 are not connected . |
|
Hard wire mode switch between current mode and mode 3 Connect Pin 1 to pin 5 (GND) by a switch. (refer to chapter 9.2.1)
Input pin 1: 10kΩ to +5V. Default active Low. Selection Active High or Disable via PC configuration tool.
RS-232 Connector functions
•Camera system remote control.
•Mode selection
•Advanced Camera
The windows based configuration is a separate Philips product which is not included with the camera itself. Functions available with this software tool are: Mode
12
8 | Mounting the camera | English |
| Top mounting: | 1/4” 20 UNC |
| Max lens weight: | 0.5 kg |
Digital Colour Camera
Bottom mounting: | 1/4” 20 UNC |
Max. lens weight: | 1.5 kg |
9 | Operating controls and features | |||
9.1 HOW TO SET UP YOUR CAMERA | ||||
| ||||
| The camera has 8 buttons which can be operated from the side of the camera. Feedback is | |||
| provided by means of On Screen Display. Extended setup functions are possible via the | |||
| software configuration tool. | |||
| Mode | = | Mode selection | |
| LVL | = Video Level | ||
| BLC | = | Back Light Compensation | |
| AWB | = Auto White Balance | ||
| LL | = | Linelock | |
| Phase | = |
+= Increase or On
- = Decrease or Off
After pressing a function button, the – or + buttons operate on the selected function:
–: Decrease or Off + : Increase or On
These functions automatically increase when the button is depressed for a longer period. For all functions the - and + actions are positive choices.There are no toggle functions and no cycles.
13