Philips LX3600D/25 Connections, Set up the speakers, Connecting speakers, and subwoofer, English

Connections

Step 1: Set up the speakers	Step 2: Connecting speakers
		and subwoofer
	Front		Front
	Right	Centre
			Left

							AUDIO
						L	L
~AC	FRONT CENTER	FRONT	REAR	REAR	SUB-
MAINS	RIGHT	LEFT	RIGHT	LEFT	W	R	R
		SPEAKERS (4		)

AUX IN LINE OUT

Rear Right Rear Left Subwoofer

English

You can choose to mount the speakers on the wall. Attach the supplied bracket firmly to the rear of speakers using the supplied screws. Then mount a screw (not supplied) on the wall where the speaker is to be hung and hook the speaker securely onto the mounted screw.

CAUTION!

You should get a qualified person to attach the brackets to the wall. DO NOT do it by yourself to avoid unexpected damage to the equipment or injury to personnel.

Helpful Hints:

–The surround speakers are labelled as REAR L (left) or REAR R (right).

–The front speakers are labelled as FRONT L (left) or FRONT R (right).

Connect the supplied speaker systems using the fixed speaker cables by matching the colours of the jacks and speaker cables.

				SURR.		SURR.	SUB-
	FRONT	CENTER	FRONT			LEFT	W
			LEFT	RIGHT		)
~AC	RIGHT	SPEAKERS			(4
MAINS

Helpful Hints:

–Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to short-circuit.

–Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.

9

001-041-LX36-22-Eng	9	3139 115 22612
		21/08/2003, 9:43 AM