Disc Operations
Auto Eco Power standby mode |
| Basic playback controls |
s h
This is a
Using the Disc Menu
Depending on the disc, a menu may appear on the TV screen once you load in the disc.
To select a playback feature or item
●Use the 1 2 3 4 or numeric keypad
To access or remove the menu
●Press DISC MENU on the remote.
Unless stated, all operations described are based on Remote Control control use. Some operations can be carried out using the DVD System Menu.
Pausing playback
1During playback, press Å.
➜ Playback will pause and sound will be muted.
2Press Å again to select the next picture frame.
3To return to normal playback, press B.
Searching backward/forward
●Press and hold S / T, then press B to resume normal playback.
➜ While searching, pressing S / T again will decrease/increase the search speed.
MUTE
●Press the MUTE repeatedly to disable and enable the sound output.
Stopping playback
●Press Ç.
Resuming playback from the last stopped point (DVD/VCD)
Resume playback of the last 10 discs is possible, even if the disc was ejected or the power switched off.
1Load one of the last 10 disc. ➜ “LOADING” appears.
2Press B and the disc will be played back from the last stop point.
To cancel the resume mode
●In stop mode, press Ç again.
Helpful Hint:
– Resume option may not be available on some discs.
E n g l i
21
21 | 3139 115 22612 | |
21/08/2003, 9:44 AM |
