Tuner Operations
E n g l i s h
IMPORTANT!
–Make sure the FM and MW antennas are connected.
Tuning to radio stations
1Press TUNER on the remote (or press SOURCE control on front panel) to select “FM” or “MW”.
2Press 3 / 4 briefly on the remote.
➜"SEARCH" appears.
➜The next radio station will tune automatically.
3To tune a weak station, press S / T briefly and repeatedly until an optimal reception is found.
Presetting radio stations
You can store up to 20 FM and 10 MW preset radio stations in the memory.
Helpful Hints:
–The system will exit presetting mode if no button is pressed within 20 seconds.
–If no stereo frequency is detected during Plug and Play, "CHECK ANTENNA" appears.
Using the Plug and Play
Plug and Play allows you to store all available radio stations automatically.
PLAY/PAUSE
AUTO INSTALL PRESS PLAY
VOLUME
| OPEN/CLOSE | PLAY/PAUSE | STOP |
IR | SOURCE | PREV | NEXT |
1 For first time setup, on the DVD system press SOURCE or TUNER to select TUNER mode,
"AUTO INSTALL PRESS PLAY" appears.
2 Press ÉÅ on the front panel to start installation.
➜ "INSTALL TUNER" appears.
➜ All previously stored radio stations will be replaced.
➜ Once completed, the last tuned radio station will play.
➜ FM followed by MW bands will be stored.
34
34 | 3139 115 22612 | |
21/08/2003, 9:44 AM |
