English
Others Functions
Tuning to radio stations
–In TUNER mode, press S or T briefly and repeatedly until the right frequency or optimum reception is obtained.
–Press S or T more than 1 second if you want to activate automatic search tuning. Tuning automatically stops when a station of sufficient strength has been found.
–Press TUNER again to select the desired band : FM or
MW.
Presetting radio stations
You can preset up to 40 stations .
1Tune to your desired radio station by pressing the S or T button on the front panel or on the remote control. and press PROGRAM to enter the program mode.
➜ “PXX : XX.XX” is displayed.
2Use the numeric keypad
3Press PROGRAM to store the station.
Night Mode Function
When very dynamic movie soundtracks are played at low volume, such as late at night, you can use Night Mode to apply appropriate compression so that
●On the remote control, press NIGHT. “NIGHT ON” appears briefly when activated.
●Press NIGHT again to deactivate. “NIGHT OFF” appears briefly.
Notes:
–This function only works when Dolby Digital is selected.
Sleep timer setting
The sleep timer enables the system to switch to standby mode automatically at a preset time.
1On the remote control, press SLEEP repeatedly to select a preset time.
➜The selections are as follows (time in minutes):
15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120™ OFF ™ 15...
2When you reach the desired length of time, stop pressing the SLEEP button.
➜“SLEEP” appears.
To check the remaining length of time after sleep timer is activated:
●Press SLEEP.
To change the preset sleep timer
●Press SLEEP again while the remaining sleep timer is shown.
➜ The display will show the next sleep timer options.
To deactivate the sleep timer
●Press SLEEP repeatedly until “OFF” is displayed, or press
STANDBY ON.
14OTHERS FUNTIONS