Important Note
Important notes for users in the U.K.
Mains plug
This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows:
1.Remove fuse cover and fuse.
2.Fix new fuse which should be a BS1362 5 Amp,A.S.T.A. or BSI approved type.
3.Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distri- bution board should not be greater than 5 Amp.
Note: The severed plug must be disposed off to avoid a possible shock hazaed should it be inserted into a 13 amp socket else- where.
How to connect a plug
The wires in the mains lead are coloured with the following code:
blue = neutral (N) Brown = live (L)
As these colours may not correspond with the colour mark- ings identifying the terminals in your plug, proceed as fol- lows:
-Connect the blue wire to the terminal marked n or coloured black.
-Connect the brown wire to the terminal marked N or coloured red.
-Do not connect either wire to the earth terminal in the plug, marked E (or ) or coloured green (or green and yellow).
Before replacing the plug cover, make certain that the cord
grip is clamped over the sheath of the lead - not simply over
the two wires.
Copyright in the U.K.
Recording and playback of material may require consent. See Copyright Act 1956 and the Performer’s Protection Act 1958 to 1972.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro- logic” and the
MANUFACTURED UNDER LICENSE FROM DIGITAL THEATER SYS- TEMS, INC. US PAT. NO 5,451,942, 5,956,674, 5,974,380, 5,978,762 AND OTHER WORLDWIDE PATENTS ISSUED AND PENDING.“DTS” AND “DTS DIGITAL SURROUND” ARE RESISTERED TRADEMARKS OF DIGITAL THEATER SYSTEMS, INC. COPYRIGHT 1996, 2000 DIGI-
TAL THEATER SYSTEMS, INC. ALL RIGHTS RESERVED.
CAUTION |
RISK OF ELECTRIC SHOCK |
DO NOT OPEN |
AVIS : RISQUE DE CHOC ELECTRIQUE'PAS OUVRIR.
This symbol is intended to alert the user of the presence of uninsulated “dangerous voltage” within the product’s encasement that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Italia
DICHIARAZIONE DI CONFORMITA’
Si dichiara che l’apparecchio
Fatto a Eindhoven
Philips Consumer Electronics
Philips, Glaslaan 2
5616 JB Eindhoven,The Netherlands
CAUTION
Use of controls or adjustments or performance of proce- dures other than herein may result in hazardous radiation exposure or other unsafe operation.
Norge
Typeskilt finnes på apparatens underside.
Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet nettkontakten.
For å redusere faren for brann eller elektrisk støt, skal apparatet ikke utsettes for regn eller fuktighet.
2IMPORTANT NOTE