|
| Basic Functions |
| PLAY | CD 1•2•3 |
| STOP | |
|
| |
| PAUSE | DEMO STOP |
| PREV | TUNER |
| NEXT | |
| NEWS |
|
| PRESET | |
|
| TAPE |
| SEARCH/ TUNE | |
DIM |
|
|
| PROG | REC AUX/CDR |
iR |
|
|
|
| VOL |
OPEN |
|
|
| BASS | TREBLE |
|
| - - + - - + |
IMPORTANT! | 2 Press PLAYÉ(ÉÅ) again to start installation. | |
Before you operate the system, complete | ➜ All previously stored radio stations will be | |
the preparation procedures. | replaced. | |
Plug and Play | To exit without storing the Plug and Play | |
Plug and Play allows you to store all available | ● Press Çon the system. | |
|
| |
radio stations automatically. | Notes: |
|
If Plug and Play has not been installed | – When the power is turned on, the disc tray may | |
|
| |
English
1 When you turn on the system, "AUTO
open and close to initialize the system.
– If you do not complete Plug and Play installation,
INSTALL - PRESS PLAY" will be displayed.
2 Press PLAYÉ(ÉÅ) on the system to start
Plug and Play will be reinitiated the next time you
installation.
turn on the power.
– If no stereo frequency is detected during
➜ "INSTALL" will be displayed and followed
by "TUNER" and then "AUTO".
Plug and Play, "CHECK ANTENNA" will be
➜ PROGRAM will start flashing.
displayed.
– During Plug and Play, if no button is pressed
➜ The system will search for all radio stations
on the FM band, then the AM band.
within 15 seconds, the system will exit Plug and Play mode automatically.
➜ All available radio stations with sufficient signal strength will be stored automatically.
➜ The system will stop searching when all the available radio stations are stored or when the memory for 40 preset radio stations is used.
➜ The last preset radio station will play when Plug and Play is completed.
To reinstall Plug and Play
1In Standby or Demonstration mode, press and hold PLAYÉ(ÉÅ) on the system until "AUTO INSTALL - PRESS PLAY" is displayed.
13
pg | 13 | 3/7/01, 3:48 PM | 3139 115 20751 |