Philips MC-45 Demonstration mode, Switching the system on, Switching the system to Standby mode, Power Saving Automatic Standby, Dim mode, Volume Control

	Basic Functions
E		Demonstration mode
gn		The system has a demonstration mode that
sil		shows the various features offered by the system.
h		To activate the demonstration
	● In Standby mode, press and hold
		DEMO STOP on the system until
		"DEMO ON" is displayed.
		➜ The demonstration will begin.

To deactivate the demonstration

●Press and hold DEMO STOP on the system until "DEMO OFF" is displayed.

➜ The system will switch to Standby mode.

Note:

–Even if you remove the AC power cord and reconnect it to the wall socket, the demonstration will remain off until you activate it again.

Switching the system on

In Standby/Demonstration mode

●Press STANDBY ON.

➜The system will switch to the last selected source.

●Press CD 1•2•3 (CD 123), TUNER, TAPE, AUX/CDR.

➜The system will switch to the selected source.

●Press any one of the CD OPEN•CLOSE (CD 10 / CD 20 / CD 30) button.

➜The system will switch to CD mode.

Switching the system to Standby mode

In Demonstration mode

●	Press and hold DEMO STOP on the system.
	In any other source mode
●	Press STANDBY ON (or B on the remote
	control).
	➜ The clock will appear on the display when the

Power Saving Automatic Standby

As a power-saving feature, the system will automatically switch to Standby mode if you do not press any buttons within 30 minutes after a disc or tape has stopped playing.

Dim mode

You can select the desired brightness for the display.

●Press DIM repeatedly to select DIM 1, DIM 2, DIM 3 or DIM OFF display mode.

➜ DIM and the corresponding mode number will appear on the display, except for DIM OFF mode.

DIM OFF .........	All available LEDs light up, display
	screen will have full brightness,
	music level bar active.
DIM 1 ...............	Some LEDs light up, display
	screen will have full brightness,
	music level bar inactive.
DIM 2 ...............	All lightings turn off, display
	screen will have full brightness,
	music level bar inactive.
DIM 3 ...............	All lightings turn off, display
	screen will be at half brightness,
	music level bar inactive.
		+ music level bar

Volume Control

Adjust VOL to increase (turn knob clockwise or press VOLUME +) or decrease (turn knob counter-clockwise or press VOLUME -) the sound level.

➜"-XX dB" will be displayed. "XX" denotes the volume level.

➜When reached the minimum volume level, "VOL MUTE" will be displayed.

To listen through the headphones

system is in Standby mode.

Note:

–If you have not deactivated the demonstration, it will resume five seconds after the system switches to Standby mode.

14

● Connect the headphones plug to the PHONES socket at the front of the system.

➜ The speakers will be muted.

PHONES

pg 001-030/C50-C70/37-Eng 14

3/7/01, 3:48 PM 3139 115 20751