hsilgnE
Clock/Timer
Sleep Timer Setting
The sleep timer enables the system to switch to Standby mode automatically within a preset amount of time.
1Press SLEEP on the remote control repeatedly to select a preset amount of time.
➜The selections are as follows (time in minutes):
15 ™ 30 ™ 45 ™ 60 ™ OFF ™ 15 …
➜"SLEEP XX" or "OFF" will be displayed.
"XX" is the time in minutes.
2When you reach the desired length of time, stop
pressing the SLEEP button.
➜SLEEP will appear on the display, except for "OFF" mode.
➜The Sleep Timer is now set. Before the system switches to standby mode, a countdown of 10 seconds will be displayed.
"SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1" ™ "SLEEP"
While SLEEP mode is activated
To check the remaining length of time
●Press SLEEP once.
To change the preset sleep timer
●Press SLEEP twice.
➜ The display will show the remaining time followed by the sequence of sleep timer options.
To deactivate the Sleep Timer
●Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY ON button.
26
pg | 26 | 3/7/01, 3:48 PM | 3139 115 20751 |