Philips MCB240 Basic Functions, Switching the system on, Power Saving Automatic Standby, English

Basic Functions

Important!

Before you operate the system, complete the preparation procedures.

Switching the system on

●Press STANDBY-ON/ECO POWER (or B on the remote).

➜The system will switch to the last selected source.

●Press CD, TUNER, DAB or AUX on the remote control.

➜The system will switch to the selected source.

●Press OPEN•CLOSEç.

➜The system will switch to the CD source.

Switching the system to Eco Power Standby mode

●Press STANDBY-ON/ECO POWER (or B on the remote).

➜The backlight for clock display is dim in standby.

➜The ECO POWER LED will be lighted.

●To view clock time in standby mode, press and hold STANDBY-ON/ECO POWER (or B on the remote) for more than 3 seconds or more.

➜ The system enters the standby mode with clock display.

●The volume level (up to a maximum volume level of 20), interactive sound settings, last selected mode (ECO Power Standby or normal standby), source and tuner presets will be retained in the player's memory.

Power Saving Automatic Standby

As a power-saving feature, the system automatically switches to Eco Power/ Standby 15 minutes after a CD has reached the end and no control is operated.

Adjusting volume and sound

1Press VOLUME 3 / 4 (+/-) to decrease or increase the volume.

➜ Display shows the volume level VOL and a number from MIN 1, 2, ...30, 31 MAX.

2Press DSC repeatedly to select the desired sound effect: POP/JAZZ/ROCK/CLASSIC.

3Press DBB to switch bass enhancement on or off.

➜ Display shows: DBB ON or DBB OFF.

4Press MUTE on the remote control to interrupt sound reproduction instantly.

➜ Playback will continue without sound and MUTE will flash on the display.

●To activate sound reproduction you can:

Ðpress MUTE again;

Ðadjust the volume controls;

Ðchange source.

English

13