Preparations
English
T-shape Antenna
Speaker | Speaker |
(right) | (left) |
AC power cord
Rear connections
The type plate is located at the rear of the system.
For users in the U.K.: please follow the instructions on page 2.
APowerBefore connecting the AC power cord to the wall outlet, ensure that all other connections have been made.
Warning!
ÐFor optimal performance, use only the original power cable.
ÐNever make or change any connections with the power switched on.
To avoid overheating of the system, a safety circuit has been built in. Therefore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it (not available for all versions).
Front Speakers
Connect the speaker wires to the Speaker terminals, right speaker to "R" and left speaker to "L", colored (marked) wire to "+" and black (unmarked) wire to
●Fully insert the stripped portion of the speaker wire into the terminal as shown.
Notes:–For optimal sound performance, use the supplied speakers.
–Do not connect more than one speaker to any one pair of +/- speaker terminals.
–Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.
9
