Philips MCB240 Clock/Timer, Setting the clock, Viewing the clock, Setting the timer, English

Clock/Timer

English

Setting the clock

The clock can be set in either 12-hour or 24- hour mode (ÒAM12:00Ó or Ò00:00Ó, for example).

1In normal standby mode, press CLOCK SET. ➜ The clock digits for the hours flash.

2Press PROGRAM on the set repeatedly to select the clock mode.

➜ ÒAM12:00Ó or Ò00:00Ó is displayed with ÒAM12Ó or Ò00Ó flashing.

3Press VOLUME (3 / 4) (+/-) to set the hours.

4Press CLOCK SET again.

➜ The clock digits for the minutes flash.

5Press VOLUME (3 / 4) (+/-) to set the minutes.

6Press CLOCK SET to confirm the time.

Note:

– The backlight for clock display is dim in standby.

Viewing the clock

●Press CLOCK SET in power-on mode. ➜ The clock time is displayed.

Setting the timer

●The system can be used as an alarm clock, whereby the CD,TUNER, DAB, AUX is switched on at a set time.The clock time needs to be set first before the timer can be used.

●During setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically.

1In normal standby mode, press and hold TIMER on the remote control for more than 3 seconds. ➜ The display shows SET TIMER and the clock digits for the hours flash

2Press VOLUME (3 / 4) (+/-) to set the hours.

3Press TIMER again.

➜ The clock digits for the minutes flash.

4Press VOLUME (3 / 4) (+/-) to set the minutes.

5Press TIMER to confirm your desired mode or just wait a while without any operation.

➜ The display shows SET SOURCE and a source option flashes.

6Press VOLUME (3 / 4) (+/-) to select sound source.

➜Display sequence shows CD, TUNER, DAB, AUX.

6Press TIMER again to confirm.

➜The timer is now set and activated.

Activating and deactivating

TIMER

●Press TIMER on the remote to turn off the

timer or turn on to the last setting again. ➜ If activated, the display shows .

Note:

–The system will exit timer setting mode if no button is pressed within 90 seconds.

Activating and deactivating

SLEEP

The sleep timer enables the system to switch off by itself after a set period of time.

● Press SLEEP on the remote control.

➜SLEEP flashes and the display shows one of the sleep time options in sequence: 90, 80, 70, 60, 50, 40, 30, 20, 10, OFF... if you have selected a time. Once SLEEP is activated, SLEEP is displayed.

●To deactivate, press SLEEP on the remote control once or more until OFF is shown, or press STANDBY-ON/ ECO POWER (or B on the remote).

➜SLEEP disappears.

24