FM Radio Reception
English
Tuning to radio stations
1Press SOURCE on the front panel of the system or TUNER on the remote to select
TUNER.
2Press and hold TUNE 1 / 2 (or S/T on the remote).
➜ The radio automatically tunes to a station with sufficient reception. Display indication during automatic tuning: SEARCH.
3Repeat step 2 if necessary until you find the desired station.
●To tune to a weak station, press TUNE 1 / 2 (or S/T on the remote) briefly and repeatedly until you have found optimal reception.
Note:
–If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2Press PROGRAM for more than 2 seconds to activate programming.
➜ AUTO PROGRAM is displayed and available stations are programmed in order of waveband reception strength: RDS followed by FM. The last preset automatically stored will then be played.
Manual programming
1Tune to your desired station (see ÒTuning to radio stationsÓ).
2Press PROGRAM to activate programming.
3Press PRESET 3 / 4 (or ALBUM/PRESET 3 / 4 on the remote) to allocate a number from 1 to 30 to this station.
4Press PROGRAM again to confirm the setting. ➜ The preset number and the frequency of the preset station are shown.
5Repeat the above four steps to store other stations.
●You can override a preset station by storing another frequency in its place.
Tuning to preset radio stations
●Press PRESET 3 / 4 (or ALBUM/PRESET 3 / 4 on the remote) until the desired preset station is displayed.
Programming radio stations
You can store up to a total of 30 FM radio stations in the memory.
Automatic programming
Automatic programming will start with from preset 1 and stop a the last programmed station. All the former programmed radio stations will be overridden.
1Press PRESET3 / 4 (or ALBUM/PRESET 3 / 4 on the remote) to select the preset number where programming should start.
RDS
Radio Data System is a service that allows FM stations to show additional information. If
you are receiving a RDS station, 
and the station name are displayed.
When automatic programming is used, RDS stations will be programmed first.
22
