Basic Operations
IMPORTANT!
ÐBefore you operate the system, complete the connection procedures.
ÐWhen the system is switched to Standby mode, it is still consuming power.To disconnect the system from the power supply completely, reomve the AC power plug from the wall socket.
Switching the system on/off
●In
➜ÒPOWER ONÓ is displayed briefly.
➜The system will switch to the selected or last selected source.
To switch the system to Eco-power standby mode
●In
➜ÒECO POWERÓ is displayed briefly.
➜
➜The LCD display will go blank.
To switch the system to standby mode
●In
➜ The clock time will be displayed. Or
Helpful hints:
–Pressing and holding B on the remote can switch between
Volume control
Press VOLUME
➜The display briefly shows ÓVOLÓ and a volume value from Ò01Ó to Ò39Ó ( ÒMINÓ or ÒMAXÓ is displayed when adjusted to the lowest or highest volume level).
To switch off the volume temporarily
●Press MUTE on the remote.
➜ Playback will continue without sound and ÒMUTEÓ is displayed briefly.
●To activate sound reproduction, you can: Ð press MUTE again;
Ð adjust the volume controls;
Sound Control
DBB (Dynamic Bass Boost)
DBB enhances the bass response.
●Press DBB to enable or disable DBB feature.
➜If DBB is activated, ÒDBB ONÓ will be shown.
➜If DBB is deactivated, ÒDBB OFFÓ will be shown.
Helpful hints:
–Some discs might be recorded in high modulation, which causes a distortion at high volume. If this occurs, switch off DBB or reduce the volume.
DSC (Digital Sound Control)
DSC provides a different type of preset sound equalizer setting.
●Press DSC on the remote (or on the system) repeatedly to select:
CLASSIC (default), ROCK, JAZZ, POP.
English
Power saving automatic standby
As a
21
