Philips MCD2160 user manual Place the unit, Connect video cables, Connect speakers

Models: MCD2160

1 26
Download 26 pages 2.22 Kb
Page 8
Image 8

3 Connect

Place the unit

1 Place the unit near to the TV.

2 Place the left and right speakers at equal distance from the TV and at an angle of approximately 45 degrees from the listening position.

Note

•• To avoid magnetic interference or unwanted noise, never place this apparatus and speakers too close to any radiation devices.

•• Place this unit on top of a table or mount it on the wall.

•• Never place this unit in an enclosed cabinet.

•• Install this unit near the AC outlet where the AC power plug can be easily reached.

SPEAKER OUT

SPEAKER OUT

100-240 V~50/60 Hz

AC MAINS~ FM

ANTENNA

Connect video cables

You can select the best video connection that your TV supports.

Option 1: Connect through a composite video (CVBS) cable (for a standard TV).

Option 2: Connect through component video cables (for a standard TV or Progressive Scan TV).

Option 1: Connect through a composite video cable

Connect the composite video cable (supplied) to:

the VIDEO socket on the back of the unit.

the video input socket on the TV.

TV

SPEAKER OUT

100-240 V~50/60 Hz

AC MAINS~

FM

ANTENNA

Connect speakers

Note

•• For optimal sound, use the supplied speakers only.

•• Connect only speakers with impedance that is the same or higher than the supplied speakers. Refer to the Specifications section of this manual.

EN 8

Page 8
Image 8
Philips MCD2160 user manual Place the unit, Connect video cables, Connect speakers