Basic Functions
Switching the system on
●Press ECO POWER/STANDBY-ON B (B on the remote).
➜“HELLO” is displayed briefly.The system will switch to the last selected source.
●Press SOURCE repeatedly (or DISC, TUNER, TAPE or AUX on the remote).
➜The system will switch to the selected source.
Switching the system to Eco Power Standby mode
●Press ECO POWER/STANDBY-ON B in the active mode.
➜ The system enters Eco power standby (the ECO POWER LED is on) or normal standby with clock display.
●The volume level (up to a maximum volume level of 12), interactive sound settings, last selected mode, source and tuner presets will be retained in the player's memory.
●If the system is normal standby with clock display, press and hold ECO POWER/STANDBY- ON Bfor 3 seconds or more to switch to Eco power standby or vice versa.
Volume control
Turn the VOLUME control on the front panel clockwise or anticlockwise or press VOL +/- on the remote to increase or decrease the volume level.
➜”VOLUME XX” is displayed on the display panel. “XX” denotes the volume level.
To listen through the headphone
●Connect the headphone plug to the n socket on the top of the back side of the DVD player. ➜ The speakers will be muted.
To switch off the volume temporarily
●Press MUTE on the remote.
➜ Playback will continue without sound and “MUTE” flashes.
●To activate sound reproduction, you can:
– press MUTE again;
– adjust the volume controls;
– change source.
English
Power-saving automatic standby
As a
Sound Control
●Press DSC repeatedly to select the desired sound effect: FLAT, CLASSIC, JAZZ, POP or ROCK.
●Press DBB/INCREDIBLE SURROUND on the system to switch on or off the surround sound effect or bass enhancement.
●You can also press DBB or IS on the remote to turn on or off the DBB or IS function respectively.
Note:
– The effect of INCREDIBLE SURROUND may vary with different types of music.
23
