Philips MCD703 owner manual Connections, Connecting the speakers, Type plate is located at

		Connections
	Subwoofer	English
Speaker		Speaker
(right)		(left)
FM	AM antenna
antenna

AC power cord

IMPORTANT!	2 Connect the passive subwoofer to the
– The type plate is located at the	WOOFER OUT (8Ω) terminal with the supplied
bottom of the system.	subwoofer cable by matching the plug types.
– Before connecting the AC power cord
to the wall outlet, ensure that all	Notes:
other connections have been made.	– Ensure that the speaker cables are correctly
– Never make or change any	connected. Improper connections may damage the
connections with the power switched on.	system due to short-circuit.
	– For optimal sound performance, use the supplied
	speakers.
Connecting the speakers
1 Connect the two front speakers to the	– Do not connect more than one speaker to any
	one pair of +/- speaker jacks.
SPEAKERS (8Ω) terminals with two speaker
	– Do not connect speakers with an impedance
cables. Right speaker to “R” and left speaker to
	lower than the speakers supplied. Please refer to
“L”, red wire to “+” and silver wire to “-”. Fully
	the SPECIFICATIONS section of this manual.
insert the stripped portion of the speaker wire
into the terminal as shown.

AB

11