17
English
Getting Started
Setting up Progressive Scan feature (for
Progressive Scan TV only)
The progressive scan display twice the number
of frames per seconds than interlaced scanning
(ordinary normal TV system). With nearly double
the number of lines, progressive scan offers
higher picture resolution and quality.
IMPORTANT!
Before enabling the progressive scan
feature, you must ensure:
1) Your TV can accept progressive signals, a
progressive scan TV is required.
2) You have connected the DVD player to your
TV using Y Pb Pr (see “Connections-Step 5:
Connecting TV- Using Component Video jacks”.)
1Turn on your TV.
2Turn off your TV progressive scan mode or turn
on interlaced mode (refer to your TV user
manual).
3Press STANDBY-ON B (B on the remote)
to turn on the DVD player.
4Select the correct Video Input channel.
➜The DVD background screen appears on the
TV.
5Press SYSTEM.
6Press 1 2 repeatedly to select "VIDEO
SETUP PAGE".
7Select "TV MODE" to "P-SCAN", then OK to
confirm.
➜The instruction menu appears on the TV.
1. ENSURE TV HAS P-SCAN.
2. CONNECT YPRPB CABLE.
3. IF TV ABNORMAL:
WAIT 15 SEC RECOVERY.
8Press 1 2 to highlight OK in the menu and
press OK to confirm.
There will be a distorted picture on your
TV at this state until you turn on the
progressive scan mode on your TV.
9Turn on your TV progressive scan mode (refer to
your TV user manual).
➜The below menu appears on the TV.
CONFIRM TO USE P-SCAN,
IF PICTURE IS GOOD,
PRESS OK BUTTON ON REMOTE.
TIME LAST 01 SECOND
0Press 1 2 to highlight OK in the menu and
press OK to confirm.
➜The setup is complete now and you can start
enjoy the high quality picture.
To deactivate Progressive manually
● When the distorted sign still appears on
the TV, it may be due to the connected TV
does not accept progressive signals, and
progressive is set by mistake. You must reset the
unit to interlace format.
1Turn off your TV progressive scan mode or turn
on to interlaced mode (refer to your TV user
manual).
2Press SYSTEM on the remote to exit the
system menu and then DISC to exit progressive
scan.
➜The DVD blue background screen will appear
on the TV.
Note:
–During normal playback in the progressive scan
mode, pressing DISC button will exit the progressive
scan mode.
pg 001-038_MCD705_98_Eng 2006.3.17, 17:0617