Connections

Step 3: Connecting speakers and subwoofer

Connect the supplied speaker systems using the fixed speaker cables by matching the colors of the jacks and speaker cable connectors.

Note:

– Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to short-circuit.

Step 4: Connecting the control cable

Connect the serial port marked “CONTROL CABLE” at the rear of the DVD player to the same port at the rear of the power amplifier with the supplied flat control cable.

Step 5: Connecting TV

IMPORTANT!

You only need to make one video

connection from the following options, depending on the capabilities of your TV.

Connect the DVD system directly to the TV.

Using Composite Video jack

Option 1

2

1

1Use the composite video connectors (yellow) of the supplied audio and composite video cables (2-in1) to connect the DVD system's VIDEO OUT jack to the video input jack (or labeled as A/ V In, CVBS, Composite or Baseband) on the

TV.

2To hear the TV channels through this DVD system, use the audio connectors (white/ red) of the supplied audio and composite video cables (2-in1) to connect AUX IN jacks to the corresponding AUDIO OUT jacks on the TV.

English

9

Page 9
Image 9
Philips MCD705/98 manual Connecting speakers and subwoofer, Connecting the control cable, Connecting TV