Set the clock, Select a source, To select

•Pressto switch this product

•between the working mode and the normal standby mode, or

•from the eco power standby mode to the working mode.

Set the clock

Note

•• During setting, if no action is made within 90 seconds, the product exits clock setting without saving earlier operations.

1 In standby mode, press and hold CLOCK to enter the clock setting mode.

»» or is displayed.

2 Press + VOL - or / to select or , and then press CLOCK.

• : 24-hour time format

• : 12-hour time format »»The hour digits begin to blink.

3 Press + VOL -or / to set the hour, and then press CLOCK.

»»The minute digits begin to blink.

4 Press + VOL - or / to set the minute, and then press CLOCK.

»»The set clock is displayed.

On the product, press SOURCE repeatedly to select a source.

• : the audio input through the AUDIO IN socket

• : the disc in the disc compartment

• : .mp3 files stored on the connected

USB storage device

• : the FM tuner

You can also press source buttons on the remote control to select a source.

•FM: the FM tuner

•CD: the disc in the disc compartment

•AUDIO IN/USB: the audio input through the AUDIO IN socket, or the .mp3 files stored on the connected USB storage device

1	In normal standby mode, press and hold
	DISPLAY until	,	, or	is
2	displayed.
2	Press VOL +/- or	/	to select	,
	, or	.

8EN