Philips MCM276R Connecting an additional appliance, FM antenna, For the devices with USB cable

Installation

English

Or

Insert the loop antenna into the slot on the set

2Fit the plug of the loop antenna to AM ANTENNA as shown below

3Adjust the position of the antenna for optimal reception (as far away as possible from the TV, VCR or other radiation sources)

AM

ANTENNA

FM antenna

The wire antenna supplied can only be used to receive nearby stations. For better reception we recommend using a cable antenna system or an outdoor antenna.

1Extend the wire antenna and fit it to FM ANTENNA as shown below

Note: If you are using a cable antenna system or an outdoor antenna, fit the antenna plug, instead of the wire antenna, to FM ANTENNA .

2Move the antenna in different positions for optimal reception (as far away as possible from the TV,VCR or other radiation sources)

3Fix the antenna’s end to the wall

Connecting an additional appliance

Connecting a USB device or memory

card

By connecting a USB mass storage device (including USB flash memory, USB flash players or memory cards) to the Hi-Fi system, you can enjoy the device’s stored music through the powerful speakers of Hi-Fi system.

1Check you have unfolded the control panel

2Insert the USB device’s USB plug into the socket on the set ‘s foldable control panel

or

for the devices with USB cable:

a. Insert one plug of the USB cable (not

supplied) to the socket on the set ‘s foldable control panel

b.Insert the other plug of the USB cable to the USB output terminal of the USB device

or

for the memory card:

a.Insert the memory card into a card reader (not supplied)

b.Use a USB cable (not supplied) to connect

the card reader to the socket	on the
set ‘s foldable control panel

14