Connecting a docking cradle
See “Dock (optional)” for details.
Using AC power
1Make sure all the connections have been made before switching on the power supply
2Connect the AC power cord to the wall socket. This switches on the power supply
When MCM276R is switched to standby, it is still consuming some power. To disconnect the system from the power supply completely, remove the power plug from the wall socket.
The type plate is located on the rear of the set.
Warning!
To avoid overheating of the system, a safety circuit has been built in. Therefore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it (not available for all versions).
Installation
English
CAUTION
Visible and invisible laser radiation. If the cover is open, do not look at the beam.
High voltage! Do not open.You run the risk of getting an electric shock.
The machine does not contain any user- serviceable parts.
Modification of the product could result in hazardous radiation of EMC or other unsafe operation.
15
