Preparations
English
CSpeakers Connection
Connect the speaker wires to the SPEAKERS (4Ω) terminals, right speaker to "R" and left speaker to "L", the wire marked in red to "+" and the wire marked in black to
●Fully insert the stripped portion of the speaker wire into the terminal as shown.
Notes:
–For optimal sound performance, use the supplied speakers.
–Do not connect more than one speaker to any one pair of +/- speaker terminals.
–Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.
DOptional connection
The optional equipment and connecting cords are not supplied. Refer to the operating instructions of the connected equipment for details.
Connecting a USB device or memory
card
By connecting a USB mass storage device (including USB flash memory, USB flash players or memory cards) to the
●Insert the USB device's USB plug into the 
socket on the set.
OR
for the devices with USB cables:
1Insert one plug of the USB cable (not supplied)
to the 
socket on the set.
2Insert the other plug of the USB cable to the USB output terminal of the USB device.
OR
for the memory card:
1Insert the memory card into a card reader (not supplied).
2Use a USB cable (not supplied) to connect the
card reader into the 
socket on the set.
Connecting other equipment to your
system
●Connect the audio left and right OUT terminals of a TV,VCR, Laser Disc player, DVD player or CD Recorder to the AUX IN (1 or 2) terminals.
Note:
– If you are connecting equipment with a mono output (a single audio out terminal), connect it to the AUX IN (1 or 2) left terminal. Alternatively, you can use a “single to double” cinch cable (the output sound still remain mono).
Slide the protective sheet on the USB socket to the right before plugging in the USB device.
10
