Preparations
Speaker | Speaker |
(right) | (left) |
| FM antenna |
AC power cord
English
Rear connections
The type plate is located at the rear of the system.
For users in the U.K.: please follow the instructions on page 2.
APower
Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made.
Warning!
ÐFor optimal performance, use only the original power cable.
ÐNever make or change any connections with the power switched on.
To avoid overheating of the system, a safety circuit has been built in. Therefore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it (not available for all versions).
BConnecting the control cable
Connect the serial port marked “CONTROL CABLE” at the rear of the CD player to the same port at the rear of the power amplifier with the supplied flat control cable.
CFM antenna connection
Connect the supplied FM antenna to the FM AERIAL terminal. Fully extend and adjust the position of the antenna for optimal reception.
●For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL (FM ANTENNA) terminal.
Notes:– This system does not support MW reception.
9
