English
To find a passage within a track
1Press and hold the control knob on the front panel to the left or right (corresponding to S/T) or press 5 /6 on the remote.
2When you recognize the passage you want, release the control knob (5 /6 on the remote).
➜ Normal playback continues.
To stop playback
●Press 9.
To interrupt playback
●Press ÉÅ during playback.
➜The display freezes and the elapsed playing time flashes when playback is interrupted.
➜To resume, press ÉÅ again.
Notes:
CD play will also stop when;
–the CD door is opened.
–the disc has reached the end.
–you select another source: FM, USB or AUX.
–you select standby.
–the set auto off time arrives.
To scan all tracks in a disc
●Press INTRO on the remote to play the first 10 seconds of each track in the whole disc one by one.
➜INTRO appears on the display.
➜The playback will start from the first track of the current disc.
Playing an MP3 disc
1Load an MP3 disc.
➜ The disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc.
2Press ALBUM +/- on the remote to select a desired album.
3Press the control knob on the front panel to the left or right (corresponding to S/T) or press ¡ / ™ on the remote to select a desired track.
➜ The album number will change accordingly as you reach the first track of an album by pressing S (¡ on the remote) or the last track of an album by pressing T (™ on the remote).
4Press ÉÅ to start playback.
Supported MP3 disc formats:
–ISO9660, Joliet
–Maximum title number: 512 (depending on filename length)
–Maximum album number: 255
–Supported sampling frequencies: 32 kHz, 44.1kHz, 48 kHz
–Supported
To stop scanning
●Press INTRO on the remote again until INTRO disappears.
16
