Basic Functions
English |
Important! |
Before you operate the system, complete the preparation procedures.
Switching the system on
●Press STANDBY-ON/ECO POWER B (or
B on the remote).
➜The system will switch to the last selected source.
●Press SOURCE on the top of the system or CD, USB, FM or AUX on the remote control.
➜The system will switch to the selected source.
Switching the system to Eco Power Standby mode
●Press
B on the remote).
➜The backlight for clock display is dim in standby.
➜The ECO POWER LED will be lighted.
●To view clock time in standby mode, press and hold
➜The system enters the standby mode with clock display.
●The volume level (up to a maximum volume level of 12), interactive sound settings, last selected mode (ECO Power Standby or normal standby), source and tuner presets will be retained in the player's memory.
Power Saving Automatic Standby
As a
Adjusting volume and sound
1Turn the VOLUME
➜ Display shows the volume level VOL and a number from MIN 01, 02, ...30 MAX.
2Press DSC repeatedly to select the desired sound effect: POP/JAZZ/CLASSIC/ROCK/FLAT.
3Press DBB to switch bass enhancement on or off.
➜ DBB appears when enabled and disappears when disabled.
4Press MUTE on the remote control to interrupt sound reproduction instantly.
➜ Playback will continue without sound and MUTE will flash on the display.
●To activate sound reproduction you can:
–press MUTE again;
–adjust the volume controls;
–change source.
14
