Different play modes: SHUFFLE and REPEAT
You can select and change the various play modes before or during playback.The REPEAT modes can also be combined with PROGRAM.
1To select your play mode, press SHUFFLE or REPEAT on the remote control before or during playback until the display shows the desired function.
➜SHUFFLE appears if the shuffle playback is activated and disappears if deactivated.
➜If REPEAT appears while TRK flashes on the display panel, it indicates to play the current track repeatedly.
➜If REPEAT ALL is displayed, it indicates to play all tracks in the whole disc repeatedly.
➜For an MP3 CD, if both REPEAT and TRK flash on the display panel, it indicates to play the current track repeatedly.
➜For an MP3 CD, if both REPEAT and ALB flash on the display panel, it indicates to play the current album repeatedly.
2Press ÉÅ to start playback if in the STOP position.
➜ If you have selected SHUFFLE, playback starts automatically.
3To return to normal playback, press the respective SHUFFLE or REPEAT button until REPEAT or SHUFFLE is no longer displayed.
●You can also press 9 to cancel your play mode.
Note:
– The Repeat and Shuffle functions cannot be activated simultaneously.
Programming track numbers
Program in the STOP position to select and store your disc tracks in the desired sequence. If you like, store any track more than once. Up to 20 tracks can be stored in the memory.
1Press the control knob on the front panel of the system upward (corresponding to PROGRAM) or press PROG on the remote to enter the programming mode.
➜ A track number flashes.
2Press the control knob on the front panel of the system to the left or right (corresonding to S/T) or press ¡ / ™ on the remote to
select your desired track number.
●For an MP3 CD, Press ALBUM +/- on the remote to select a desired album number.
3Press the control knob on the front panel of the system upward (corresponding to PROGRAM) or press PROG on the remote to confirm the track number to be stored.
➜
4Repeat steps
➜ Playback starts automatically from the first track programmed if you attempt to program more than 20 tracks.
5Press 9 to finish programming. ➜ PROG displays on the screen.
6To start playback of your disc program, press ÉÅ directly.
Erasing the program
You can erase the program by:
●pressing the control knob on the front panel of the system upward (corresponding to PROGRAM) or press PROG on the remote again;
●pressing 9 once in the STOP mode;
●pressing 9 twice during playback; ➜ PROG disappears.
●opening the CD compartment;
English
17