English
16
Step 3: Setting the speakers
You can adjust the delay time (center and
rear speakers only) and volume level for
individual speakers. These adjustments
let you optimise the sound according to
your surroundings and setup.
Test Tone - Turning on/off
If you have turned on the test tone, the
test signal will be automatically generated
to help you judge the sound level of each
speaker.
1In disc mode, press SYSTEM MENU.
➜Use the 1234keys on the remote
to navigate in the menu.
2Highlight icon and press 4.
Move to and press 2.
Move to {TEST TONE} and press 2.
OFF
ON
NIGHT MODE
CNTR DELAY
REAR DELAY
TEST TONE
TEST TONE
3Press 34 to select a setting.
Adjusting the delay time
4Press 34 to highlight one of the options
below at a time, then press 2.
NIGHT MODE
CNTR DELAY
REAR DELAY
TEST TONE
CENTER DELAY SET TO 1 MS
{CNTR DELAY}– Select this to set the
delay time in relation to the listening
position/distance from the center speaker
(5ms, 3ms, 2ms, 1ms or OFF).
{REAR DELAY}– Select this to set the
delay time in relation to the listening
position/distance from the rear speakers
(15ms, 12ms, 9ms, 6ms, 3ms or OFF).
5Press 1 2 to adjust the settings that
best suit your surround sound needs.
6Press OK to confirm.
HelpfulHint:
– Use longer delay time settings when the
rearspeakers are closer to the listener than
thefront speakers.
Adjusting the speaker output levels
You can adjust the rear speakers, center
speaker and subwoofer output levels by
comparing the sound from the front
speakers.
●Press the respective buttons on the
remote (REAR+-,CENTER +-
andSUBW +-) to adjust the output
level between -15dB ~ +10dB.
HelpfulHint:
– If you have selected Stereo mode,
adjustingthe center and rear speakers’
volumelevel will have no effect.
Getting Started
TIPS: Toreturn to the previous menu, press 1.
To exit the menu, press SYSTEM MENU.