English
29
Tuner Operations
IMPORTANT!
Make sure the FM and AM antennas
are connected.

Tuning to radio stations

1Press TUNERon the remote (or press
SOURCE control on front panel) to
select “FM” or “AM”.
2Press and hold S / T on the
remote until the frequency indication
starts to change, then release.
➜The next radio station will tune
automatically.
3Totune a weak station, press S/T
briefly and repeatedly until an optimal
reception is found.

Presetting radio stations

You can store up to 40 preset radio
stations in the memory, starting from FM
and followed by AM bands.
Automatic presetting
You can store all available radio stations
automatically.
●In tuner mode, press and hold PROG
until "AUTO PROG" appears.

AUTO PROG

➜All the available radio stations with
strong transmission signal will be stored.
➜Automatic preset will begin from
preset (1) and all your former presets will
be overridden.
➜If it reaches 40 presets, “PROG FULL”
appears.
➜Once completed, “PROG END”
appears.
Manual presetting
You can choose to store only your
favourite radio stations.
1Tune to your desired radio station (see
“Tuning to a radio station”).
2Press PROG.
➜“PROGRAM” icon appears.
3Use the numeric keypad (0-9) to
select a preset number.
➜If “PROGRAM” icon goes off before you
select the desired preset number, press
PROG again.
4Press PROG again to store.
5Repeat steps 1~4to store other radio
stations.
HelpfulHints:
– If you attempt to program more than 40
presetradio stations, “PROG FULL”
appears.
– The system will exit presetting mode if no
buttonis pressed within five seconds.

Selecting a preset radio

station

●Press 1 2 or use the numeric keypad
(0-9) to select a preset number.
➜The preset number, radio frequency,
and waveband will appear.
Deleting a preset radio station
●Press and hold Ç until “PXX CLR”
appears.
➜The current preset radio station will
be deleted.

Changing tuning grid

In some countries, the frequency step
between adjacent channels in the AM/FM
band is 9K/50K(10/100K in some areas).
The preset frequency step in the factory
is 9K/50K.
●In tuner mode, press and hold PLAY/
PAUSE on the front panel for more than
5 seconds, the display will show “9/
50KHZ” or “10/100KHZ” .