Sound and Volume Controls
Sound Control
IMPORTANT!
For proper surround sound, make sure the speakers and subwoofer are connected (see page 14.)
Selecting surround sound
●Press SURROUND (SURR.) to select :
➜The availability of the various surround sound modes depends on the number of speakers used and the sound available on the disc.
➜The center and surround speakers operate only when the DVD home cinema system is set to
➜The available output modes for
➜Stereo broadcasts or recordings will produce some surround channel effects when played in a surround mode. However, monaural (single channel sound) sources will not produce any sound from the surround speakers.
Note:
–You are not able to select the surround sound mode if the system menu/menu bar is turned on.
Turning on/off clear voice effect
You can enhance the center and surround sound outputs by activating the clear voice sound feature if you have selected
Adjusting Bass/Treble level
The BASS (low tone) and TREBLE (high tone) features enable you to define the sound- processor settings.
1Press BASS or TREBLE.
➜ The level indicator appears.
2Within five seconds, use the VOLUME control
to adjust the Bass or Treble level
Selecting digital sound effects
Select a preset digital sound effects that matches your disc’s content or that optimizes the sound of the musical style you are playing.
●Press SOUND on the remote.
When playing movie discs, you can select : CONCERT, DRAMA,ACTION or
When playing music discs or while in TUNER or AUX/DI mode, you can select : ROCK, DIGITAL, CLASSIC or JAZZ.
Volume control
●Adjust VOLUME control (or press
VOL
➜ "VOL MIN" is the minimum volume level and “VOL MAX” is the maximum volume level.
E n g l i s h
To listen through the headphones
● Press VOICE on the remote to select “CLEAR | ● Connect the headphones plug to the n socket | ||
| VOICE ON.” | ||
| at the front of the DVD system. | ||
| ➜ To turn off the setting, press VOICE again to | ||
| ➜ The speakers will be muted. | ||
| select “CLEAR VOICE OFF.” | ||
|
| ||
|
| To turn off the volume temporarily | |
| Changing subwoofer volume level | ● Press MUTE on the remote. | |
● Press SUB +/- on the remote to adjust | ➜ Playback will continue without sound and | ||
"MUTE" appears. | |||
| subwoofer volume level | ||
| ➜ To restore the volume, press MUTE again or | ||
|
| ||
|
| increase the volume level. |
41