Philips MX6000I/37 TV Shape, Check if you see a picture, No picture or distorted picture, Setup, Picture, English, TV Shape, TV Shape, Widescreen, TV Settings, 4:3 Letterbox

Settings for the TV

The following settings optimize the connection between the Streamium System and the TV.

Check if you see a picture

1Switch on your TV.

2Press AUX on the remote control.

3Next, press SYSTEM MENU on the remote control.

4If necessary set the TV to the correct audio/video channel for the Streamium System. Such channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN, etc.These channels are often near channel 00. If you are using an RF modulator, select the channel for the RF modulator.

➜The system menu of the Streamium System should appear on the TV.

No picture or distorted picture

The Streamium System may be set to the wrong video signal. Observe the display on the Streamium System.

1If necessary, press AUX on the remote control. Next, press

SYSTEM MENU.

2Press 4 repeatedly to select PICTURE. Next press 2.

3Press 4 repeatedly to select TV SETTINGS. Next, press 2.

4Press 4 repeatedly to select VIDEO OUTPUT. Next, press 2.

5Press 4 or 3 repeatedly to select

–Y PB PR (COMPONENT VIDEO) if you have connected

the TV to COMPONENT PR PB Y on the Streamium System,

–CVBS if you have connected the TV to CVBS or S-Video on the Streamium System.

6Press 2OK to conﬁrm the setting.

7Next, press SYSTEM MENU to exit the system menu.

TV Shape

You may set the Streamium System to display a DVD movie in one of three formats: Letterbox, Panscan, or Widescreen. The TV Shape you select must be supported by the movie. If not, the TV Shape settings will not affect the picture.

1Press SYSTEM MENU on the remote control.

2DVD: Use 1, 2, 3 or 4 to select Setup ➜ TV ➜ TV Shape.

INTERNET, PC LINK, AUX: Use 1, 2, 3 or 4 to select Picture ➜ TV Settings ➜ TV Shape.

DVD	Stop
TV	View	Program
Setup	TV shape
	4:3 Panscan
TV shape	4:3 Letterbox
Video output	Widescreen
Video output

3Press 2 to enter the menu and 4 to select

–4:3 Letterbox if you have a regular TV and the picture will have black bars at the top and bottom of the screen,

–4:3 Panscan if you have a regular TV and both sides of the picture will be trimmed to ﬁt your TV screen,

–Widescreen if you have a widescreen TV.

Note: Some widescreen TVs may show only part of the System Menu.This is not an error of the Streamium System settings. Adjust the screen mode on your TV. See your TV owner’s manual for details.

English