System Menu – Audio settings

Night Mode

Night mode reduces the volume differences between loud and quiet passages. At night, you can enjoy surround effects at low volume without disturbing your children or neighbors. Night mode is available only for Dolby Digital and MPEG multi-channel signals and only if supported by the source material (e. g. a movie).

1Press SYSTEM MENU on the remote control.

2DVD: Select Preferences ➜ Sound ➜ Night Mode.

INTERNET, PC LINK: Select Audio ➜ Night Mode.

DVD

Stop

 

Sound

View

Program

Preferences

 

 

Night mode

off

on

Analogue Output

 

 

ClearVoice

 

 

Use = to toggle the value, ≠ or ± to move to other options.

3Press 2 repeatedly to switch Night Mode on or off. Next, press 2OK to confirm.

Analogue Output

This feature is similar to selecting the surround sound with SURROUND on the remote control.

1Press SYSTEM MENU on the remote control.

2DVD: Select Preferences ➜ Sound ➜ Analogue Output.

INTERNET, PC LINK: Select Audio ➜ Analogue Output.

3Press 4 repeatedly to select Multi-channel, Hall or Stereo. Next, press 2OK to confirm.

Note: If you connected any equipment (e. g. a tape deck) to LINE OUT on the Streamium System and the equipment is suited for stereo signals only, set Analogue output to Stereo.

Digital Output

Adjust Digital Output if you have connected the Streamium System´s DIGITAL OUT to external digital equipment.

1Press SYSTEM MENU on the remote control.

2DVD: Select Setup ➜ Audio Menu ➜ Digital Output.

INTERNET, PC LINK: Select Audio ➜ Digital Output.

3Press 3 or 4 to select

–Off if you do not use DIGITAL OUT in your connections.

–PCM only if you use DIGITAL OUT in your connections, but the Stereo equipment does not include a built-in digital multi-channel decoder.

–All if you have connected the Streamium System to Stereo equipment that has a built-in multi-channel decoder.

4Next, press 2OK to confirm.

English

41