Internet and PC Link
Follow these instructions
–if you have no router and
–if you have a PC with a wireless network card or with a wireless USB adapter.
You will be able to access media files (e. g. MP3 files) stored on your PC.
wireless USB adapter
1Make sure the network settings of the wireless network card on your PC are set to
2If necessary, switch on your PC.
3Press PC LINK on the remote control.
➜The Streamium System tries to connect automatically to a wireless network.
4If the Streamium System connects to a wireless network, it will display its network name (SSID) briefly. Please verify that the displayed network name corresponds to your PC. If it does not, press SYSTEM MENU and select Network Settings ➜ Network Config. to change the wireless network settings.
If the Streamium System connects to the PC, the computer name of your PC will be displayed. Please keep in mind that “network name” (SSID) and “computer name” are not the same.
If the Streamium System fails to connect, read the message on the TV screen and continue with one of the following paragraphs.
If ‘Choose your wireless network’ appears Several wireless networks or one encrypted network are available.
1Press 4 or 3 repeatedly to select the network name of your PC.
If the network name of your PC does not appear, press
the red button (SUBTITLE) on the remote control to select manual and continue with “If ‘Enter wireless network name (SSID)’ appears.”
2Press the green button (ANGLE) on the remote control to confirm the selected network.
3If the selected network is WEP encrypted, continue with “If the network is WEP encrypted.”
If ‘Are you using a wireless (WiFi/802.11) or a
wired (Ethernet) network connection?’ appears
●Press the red button (SUBTITLE) on the remote control to connect to a wireless network.
If ‘Enter wireless network name (SSID)’ appears
1Press the red button (SUBTITLE) on the remote control to search again for all available networks or, use the number buttons to enter the network name (SSID) of your PC.
The network name is case sensitive. Press the number buttons repeatedly to change from lower to upper case characters. On the display of the Streamium System case- sensitive characters are distinguished by size. For example, “Gg” will be shown as “GG.”
2Press 2OK to confirm.
➜Are you using an Access Point or
3Press the green button (ANGLE) on the remote control to select
➜Are you using WEP encryption on your wireless network? appears.
4If your network is not WEP encrypted, press the red button (SUBTITLE) on the remote control to connect to your PC.
If the network is WEP encrypted, press the green button (ANGLE) on the remote control.
If the network is WEP encrypted
You will be asked to enter up to 4 encryption keys. For the encryption keys check the network settings of the wireless network card on your PC.
1Use the number buttons to enter the encryption key. Next, press 2OK to confirm.
2Repeat step 1 for all encryption keys. If not all of the
4 encryption keys are used in your network, enter “0” (zero) for no encryption key.
If the Streamium System does not connect to your PCThe Streamium System may not connect to the PC because
–a connection error has occurred. Press PC LINK again.
–you have not yet installed the Philips Media Manager software on your PC.
–the IP address of the Streamium System and that of your PC are not in the same subnet.
–the PC is switched off.
English
Please visit http://My.Philips.com 23