D) PC only with a network interface (Ethernet) card

Follow these instructions if you want to connect the Streamium System directly to your PC without using a wireless connection.

cross over ethernet cable

1Connect ETHERNET on the Streamium System to the ethernet jack of the PC with a cross over ethernet cable (not supplied).

Only use a cross over ethernet cable to connect the Streamium System directly to the PC.

2If necessary, switch on your PC.

3Wait for 10 seconds, then press PC LINK on the remote control.

If the Streamium System connects to the PC, the computer name of your PC will be displayed.

If the Streamium System does not connect tothe PC

The Streamium System may not connect to the PC because

a connection error has occurred. Press PC LINK again.

you have not yet installed the Philips Media Manager software on your PC.

the PC is switched off.

the IP address of the Streamium System and that of your PC are not in the same subnet.

Internet and PC Link

English

Please visit http://My.Philips.com 25