To enter the desired digits, use the alphanumeric buttons on the remote control; or press / repeatedly.

Note

Ensure that you never enter an IP address that is already assigned to a computer/device on the network.

Wired connection

NP3700

Connect to the router by using the Ethernet cable

1Select [Yes], when asked whether to set up network connection (see ‘First-time setup’).

2Use an Ethernet cable to connect the unit to the router.

p

12V=1A

To Modem

LAN4

LAN3

LAN2

LAN1

Reset

Connect to the home Wi-Fi/wired network

On the unit, select [Wired (Ethernet)].

»The unit starts to acquire an IP address assigned by the network automatically.

»A message appears when the connection is completed successfully.

2/2

Wireless (WiFi)

Wired (Ethernet)

Tip

The router may fail to assign an IP address,

Protocol) is unavailable or disabled on the router. You may need to enter the IP address manually, or press BACK to start re- connecting.

Connect to the Internet

Connect to the Internet as prompted.

»

time setup is complete.

NP3700

Internet

Note

Ensure that the router connects to the Internet directly and no dial-up is required on the computer.

22EN

Page 21
Image 21
Philips NP3700/12 user manual Wireless WiFi Wired Ethernet, Wired connection