Philips NP3700/12 user manual Acquiring IP address, Wireless connection: Enter IP address manually

Tip

If you have hidden the SSID of the router (e.g. disable the SSID broadcasting), go to the end of the list of Wi-Fi network. Select [Other...]

>[Manual SSID entry]. In the text box, enter the name of the router.

Note

The router may fail to assign an IP address,

Protocol) is unavailable or disabled on the router. You may need to enter the IP address manually, or press BACK to start re-connecting.

Wireless connection: Enter IP address manually

NP3700

Stop getting Auto IP

1Search for the home Wi-Fi network, and then, connect to the home Wi-Fi network.

»The unit starts to acquire an IP address assigned by the Wi-Fi network automatically.

2Press BACK on the remote control to stop getting auto IP.

English

Get the IP address of the router

Consult the user manual of the router.

Or, to check for the settings of the router, enter the IP address (e.g. 192.168.1.1) in the web browser (e.g. Internet Explorer) of the computer, and then, get the desired information in the setup page.

Enter the IP address manually

On the NP3700, enter an IP address that allows the unit to be in the same subnet as the router.

For example, if the router has

IP address: 192.168.1.1, Subnet mask: 255.255.255.000;

Then, enter the following on the unit: IP address: 192.168.1.XX (where XX denotes a number), Subnet mask:

255.255.255.000.

Acquiring IP address...

Press <Back> to enter IP address manually

Press / repeatedly to select the entry location;

EN 21