–If the system is reading the disc, programming is not possible, “READING” will be displayed and followed by "DISC X" . "X" is the current read disc number.
–During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically.
Reviewing the program
Reviewing of the program is possible only when playback is stopped.
1Press ’or ‘repeatedly to review the programmed tracks.
2Press ‚once to exit review mode.
Playing the program
1Press PLAYĥto start program playback.
ª"PLAY PROGRAM" will be displayed.
ªThe track number and elapsed
playing time of the current track will appear on the display.
•If you press REPEAT during program playback, the current track or all programmed tracks will be played repeatedly.
ª"TRACK" or "PROGRAM" will be displayed.
ªThe REPEAT and PROGRAM appear on the display.
2Press ‚to stop program playback.
Notes:
–If you press any of the CD DIRECT PLAY buttons, the system will play the selected disc or track and the stored program will be ignored temporarily. The PROGRAM display also will disappear temporarily from the display. It will reappear when playback of the selected disc ends.
–REPEAT DISC mode is not available when program playback begins.
Erasing the program (when
playback is stopped)
•Press ‚.
ª"PROGRAM CLEARED" will be displayed.
Note:
–The program will be erased when the system is disconnected from the power supply or when the CD carousel tray is opened.
Shuffle (only on remote control)
In shuffle mode, the system plays all the available discs and their tracks in random order. Shuffle may be used also when tracks are programmed.
To shuffle all the discs and tracks
1Press SHUFFLE.
ª"SHUFFLE" will be displayed.
ªThe SHUFFLE, the disc and the track selected at random appear on the display.
•The discs and the tracks will be played in random order until you press ‚.
•If you press REPEAT during shuffling, the current track or all available discs will be played repeatedly.
ª"TRACK" or "ALL DISC" will be displayed.
ªThe REPEAT and SHUFFLE appear on the display.
2Press SHUFFLE again to resume normal playback.
ªThe SHUFFLE disappears from the display.
Note:
–REPEAT DISC mode is not available when shuffle is selected.
CD
Repeat (only on remote control)
You can play the current track, a disc or all available discs repeatedly.
1Press REPEAT on the remote control to select the various repeat modes.
ª"TRACK", "DISC", "ALL DISC" or "OFF" will be displayed.
ªThe REPEAT appears on the display.
• The selected track, selected disc or all
available discs will now be played repeatedly until you press ‚.
2Press REPEAT until the "OFF" mode is displayed to resume normal playback.
ªThe REPEAT disappears from the display.
Notes:
–REPEAT DISC mode is not available during program play or shuffle mode.
–You can also repeat shuffling a program.
ª“TRACK“ or “PROGRAM" will be displayed.
ªThe REPEAT, PROGRAM and SHUFFLE
appear on the display.
English
19
pg | 19 | 3/6/00, 1:26 PM | 3139 116 19721 |
