English
26
RECORDING
Dubbing tapes tape deck 2)
1Press TAPE ( TAPE 1•2 ) to select tape deck 2.
2Load the prerecorded tape into tape deck 1 with full spool to the left and a blank tape into tape deck 2 with full spool aside.
3Press ’or ‘to select the recording tape side (see Tape Side under TAPE section).
4Press DUB (HSD) once for normal speed dubbing or twice (within 2 seconds) for high speed dubbing.
ª"NORMAL" (normal speed) or "FAST" (high speed) will be displayed, followed by "DUB" with "! or @" scrolling left or right depending on the tape side selected.
ªThe HSD appears on the display during high speed dubbing.
•Dubbing will start immediately. ª The REC starts flashing.
5Press ‚to stop dubbing.
Notes:
–Only Œ mode is available during dubbing.
–At the end of side A, flip the tapes to side B and repeat the procedure.
–Dubbing of tapes is only possible from tape deck 1 to tape deck 2.
–To ensure good dubbing, use tapes of the same length.
–During high speed dubbing in Tape mode, the sound is reduced to a low volume.
–You can listen to another source while dubbing.
–Dolby B NR button has no influence during dubbing (dubbing from tape deck 1 to tape deck 2). An original tape recorded with Dolby B NR automatically produces a copy with Dolby B NR.
CD Synchro Start Recording
1Load a blank tape into tape deck 2 and a disc into a disc tray.
2Press CD to select CD mode.
•You can program the tracks in the order you want them to be recorded (see Programming Tracks). If not, select the
disc by pressing CD (CD 1•2•3) and the tracks are recorded according to the order on the selected disc.
3Press RECORD to start recording. ª The REC starts flashing.
•CD will start playback automatically.
4 Press ‚to stop recording.
One Touch Recording
•For One Touch Recording, as soon as you press RECORD, the current source (CD, TUNER or AUX) will be recorded on tape deck 2.
1Load a blank tape in tape deck 2.
2Press RECORD to start recording. ª The REC starts flashing.
3Press ‚to stop recording.
Note:
–When you press RECORD while in TAPE mode, "SELECT SOURCE" will be displayed. One Touch Recording is not possible in TAPE mode.
Digital Recording via Digital Out
For CD digital recording, please refer to the Instructions Manual of the CD Recorder, digital audio equipment, etc.
pg | 26 | 3/6/00, 1:27 PM | 3139 116 19721 |
