Philips PET738/93 user manual Powering your remote control, Start up, Setup

Models: PET738/93

1 35
Download 35 pages 46.74 Kb
Page 14
Image 14
4.2 Powering your remote control

*Rechargeable batteries have a limited number of charge cycles and may eventually need to be replaced. Battery life and number of charge cycles vary by use and settings.

4.2 Powering your remote control

1Open the battery compartment. Remove the protec-

tive plastic tab (first time users only).

2Insert 1 x lithium 3V battery, type CR2025, then close the compartment.

CAUTION

Batteries contain chemical substances, so they should be dis- posed of properly.

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Incorrect use of batteries can cause electrolyte leakage and will corrode the compartment or cause the batteries to burst.

Remove the batteries if the set is not to be used for a long time.

Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.

5 Start up

5.1 Setup

1Press SETUP. A list of features is shown.

Page 14
Image 14
Philips PET738/93 user manual Powering your remote control, Start up, Setup