Connecting Other Devices
EN
Troubleshooting section.
7.If possible, send a test fax from the fax machine you just con- nected. If you cannot send a test fax, ensure you have a dial tone.
Dial-Up Modem
Follow these steps to connect a
1.Locate an existing electrical outlet near your
2.Plug the extension unit into the electrical outlet.
3.Plug one end of a phone cord into the single phone jack on the right side of the extension unit.
4.Plug the other end of a phone cord into the phone jack on the
5.Look for a green indicator light on the front of the extension unit. If the indicator light remains red, refer to the Troubleshooting section.
6.Send a test call from the
VoIP Phone Connection
Follow these steps to extend your VoIP phone service† to any electrical outlet in your home using a Philips Wireless Phone Jack for Voice/Data extension unit††:
1.Locate an existing electrical outlet near your VoIP telephone adaptor.
2.Plug the base unit into the electrical outlet.
3.Plug one end of a phone cord into the phone jack on the right side of the base unit labeled LINE.
4.Look for a solid red indicator light on the base unit.
5.Plug the other end of a phone cord into one of the phone jacks on your VoIP telephone adaptor.
6.Plug the extension unit into an A/C outlet where you desire a phone connection.
7.Connect the phone to the single phone connector on the right side of the extension unit.
8.Look for a green light on the front of the extension unit. If the indicator light remains red, refer to the Troubleshooting section.
9.Pick up the phone handset, and listen for a dial tone. If there is no dial tone, refer to the Troubleshooting section.
9
