Philips 1-IB7771 E001 Set-Up And Quick Use - Cable Hookups Cable Tv, Vcr To Tv, with the VCR

SET-UP AND QUICK USE - CABLE HOOKUPS

CABLE TV

SMART

CABLE INPUT/CONVERTER

Your home may use a single (75 ohm) cable, or have a Converter

Box installation. Connect the thread- ed end of the cable signal to the TV's antenna plug and screw it down.

BEGIN

If your Cable TV signal is a single

round cable (75 ohm) then you're ready to connect to the TV.

If you have a Cable TV Converter

Box: Connect the Cable TV signal to the Cable Signal IN(put) plug on the Converter.

Cable TV Company

IN OUT

Cable TV Signal Input

NOTE: The connecting cable for the Converter is supplied from the Cable TV Company.

Cable TV Converter

Box Connection

Back of TV

2

HELP

Remember, set the TV for the type signal you've just connected (see page 7.)

To select only the channel numbers on your Cable system see “Auto Install" (page 7). If you use a Cable Converter box, set the TV to the same channel as the converter's CH 3/4 switch (on the rear of

Connect the Cable TV cable to

the ANTENNA/CABLE plug on the

TV. If you have a Cable Converter

Box: Connect the Converter to the ANTENNA/CABLE plug on the TV.

OR	75V	VIDEO AUDIO
	ANT /
	CABLE
		IN

Round Cable	1
75Ω Ohm

the converter.)

SET-UP AND QUICK USE - VCR HOOKUP
VCR TO TV
BASIC CONNECTION
he basic Antenna, or Cable	Outdoor VHF/UHF
TTV, to VCR to TV connection				Back of TV
	Antenna
is shown to the right. For more
information on other hookups
refer to your accessory VCR and
Cable Converter Owner's Manual	300 to 75Ω Ohm
for details.
	Adapter	75V	VIDEO	AUDIO
		ANT /
		CABLE
BEGIN			IN
Connect your Antenna or Cable
TV signal to the IN FROM
ANT(enna) plug on the VCR.
Connect the OUT TO TV plug	IN FROM ANT.	OUT TO TV
on the VCR to the ANTENNA plug
on the TV (connecting cable supplied
with the VCR).
Refer to the Owner's Manual				Round Cable
		75Ω Supplied with VCR
included with your VCR for other		VCR
possible connections and TV/VCR	Cable TV signal
operating details.
	5 - IB7771 E001