Philips RCP7005TP2L Connecting to a cable box or satellite receiver, Aerial/Decoder Cable TV

Models: RCP7005TP2L

1 61
Download 61 pages 49.33 Kb
Page 17
Image 17

Connecting to a cable box or satellite receiver

If you have a cable or satellite receiver with a built-in decoder, connect it to this recorder and your TV as shown on this page. If you are using a separate decoder box for your cable/satellite TV, set up following the instructions on the right.

Using the setup on this page you can:

Record any channel by selecting it on the cable box/satellite tuner.

1This enables you to watch and record TV channels.Connect RF cables as shown.

2AUDIO/VIDEO connector to a SCART AV connector

on your TV.

This enables you to watch discs.Use the SCART cable to connect the EURO AV1

3DECODER connector to a SCART AV connector on

your satellite/cable box.

This enables you to record scrambled TV channels.Use a SCART cable to connect the EURO AV2

ip

This recorder has a ‘loop through’ function. This feature allows you to record a TV program from the built-in TV tuner in this recorder, while watching a satellite or cable channel. Press TV/VIDEO to select the TV mode during recording. The TV indicator appears.

Caution:

Do not connect this recorder ‘through’ your VCR, satel- lite receiver or cable box. Always connect each compo- nent directly to your TV or AV receiver.

Aerial/Cable TV

Wall Jack

Cable Box or Satellite Receiver

AERIAL

AERIAL

SCART AV1

SCART AV2

INPUT

OUTPUT

 

 

Connections (Continued)

Connecting an external

 

 

decoder box

English

satellite or cable TV system, use the setup described on

If you have an external,dedicated decoder box for your

 

this page.

 

Connect the cable from the aerial/cable TV outlet to

 

1 the aerial input on your cable/satellite tuner.

 

Use a SCART cable to connect your decoder to

 

2 your cable/satellite tuner.

 

See the manual for your decoder box for more

 

detailed instructions.

 

3DECODER connector to a SCART AV connector on your satellite/cable box.Use a SCART cable to connect the EURO AV2

4AUDIO/VIDEO connector to a SCART AV connector on your TV.Use the SCART cable to connect the EURO AV1

Caution:

Information from the decoder (for example, relating to pay TV services), is only viewable when this recorder is off (in standby).

For timer recording to work properly on this recorder, the satellite/cable box must also be switched on dur- ing recording.

Aerial/Decoder

Cable TV

SCART AV

Wall Jack

Cable Box or

Satellite Receiver

AERIAL

AERIAL

SCART AV1

SCART AV2

INPUT

OUTPUT

 

 

AERIAL

RF.OUT

AERIAL

RF.OUT

Rear of Recorder

Rear of Recorder

 

17

Page 17
Image 17
Philips RCP7005TP2L Connecting to a cable box or satellite receiver, Connections Connecting an external Decoder box