Philips RCP7005TP2L owner manual Timer Recording

Timer Recording

This Recorder can be programmed to record up to 8 pro- grams within a period of 1 month.

English

1

Press TIMER.

The Timer Record menu will appear.

Timer Record

SP

198 min Free

Media

PR

Date

Start Time

End Time

Mode

PDCVPS/

DVD

9

16/05 Sun

10:07

11:00

SP

ON

OK OK

C07

TIMER Timer Record List

Close

•Media – Choose a media (DVD or VCR).

•PR – Choose a memorized program number, or one of the external inputs from which to record.

•Date – Choose a date up to 1 month in advance, or select a daily or weekly program.

•Start Time – Set the recording start time.

•End Time – Set the recording end time.

•Mode – Choose a record mode. DVD: SP, LP, EP, XP, or AT (Auto) VCR: SP, LP, AT (Auto)

AT (Auto) mode determines how much time is available on the disc or tape and switches record mode, if necessary, to complete recording the program. AT mode cannot be selected when VPS/PDC is ON.

•VPS/PDC – The VPS/PDC system automatically adjusts the recording time so that even if a pro- gram is not running to schedule, you won’t miss it. For VPS/PDC to work properly, you must input the correct announced time and date of the pro- gram you want to record.

Note that VPS/PDC may not work with every sta- tion.

otes

•Stations that use VPS/PDC typically include VPS/PDC information in the teletext TV guide pages. Please refer to these pages when set- ting a timer recording.

•This recorder takes approximately 20 seconds to switch on and start recording. This means that when using VPS/PDC, there may be instances where the beginning of the program is not recorded.

2recording(s).

•b / B (left/right) – move the cursor left/right

•v / V (up/down) – change the setting at the cur- rent cursor position

•Press RETURN to exit the Timer Record menu.

•Press TIMER to display Timer Record List.Enter the necessary information for your timer

	Press OK to save the program.
3 The Timer Record List will appear.
4	Press RETURN (O) to exit the Timer Record
	List.

Make sure that you load a recordable disc or

5 tape and press 1 to switch your unit to Standby.

otes

•The Timer indicator lights on the front panel display.

•If the Disc and Tape indicator are blinking, either no disc or tape is loaded, or the loaded disc is not recordable.

•The Recorder will record the audio according to the cur- rent TV tuner setting (Stereo, Mono or Bilingual).

Use the AUDIO button to set the audio before switching the Recorder to Standby mode.

•You must press 1 to stop the Timer Recording.

•The Recorder will automatically power off when the Timer Recording ends.

If the unit is DVD mode when the VCR timer recording ends, the unit will not automatically power off.

•There is a short delay when a timer recording finishes to confirm the recorded program. If two timer recordings are set to record sequentially (one right after the other), the very beginning of the later program may not be recorded.

•If you wish to watch the DVD playback during the VCR timer recording, press DVD (or SOURCE) to change to DVD mode and perform the DVD playback. You cannot playback the VCR during the DVD timer recording:

The recommendable recordable DVD discs

DVD+R	DVD+RW	DVD+R(DL)
SONY (2.4x, 4x, 8x, 16x)	SONY (2.4x)	Mitsubishi (2.4x)
TDK (4x)	TDK (2.4x)	Maxell (2.4x)
Mitsubishi (4x, 8x)	Philips (4x)	-
Ricoh (2x, 4x, 8x)	Ricoh (2.4x)	-
-	HP (2.4x, 4x)	-

46