Specifications
Specifications
The specifications and design of this product are subject to change without notice.
Hardware | Red LED (continuously on when powered, blinking during RF reception) |
| 16 IDs and 4 CHs |
| 4 outputs for IR emitters |
| Possibility to have multiple RF extenders in one home not interfering |
| Positioning: freestanding, mounted horizontally or hanging up side |
| down |
|
|
Dimensions | 4.5 x 3.2 x 1.2 inch (113 x 81 x 30 mm) |
|
|
Operating | 32°F to 122°F (0°C to 50°C) |
temperature |
|
|
|
Infrared (IR) | Operating distance: up to 16 feet (5 meters) |
| IR frequency range: DC/flash codes, |
|
|
Radio | Operating distance: up to 100 feet (30 meters) |
frequency (RF) | depending on the surrounding conditions |
| Frequency: 418 MHz (US) |
|
|
Dual IR emitters | Number of IR emitters: up to 8 (4x2), emitters wired in series |
| 3.5mm mono |
| Cable length: 10 feet (2.5 meters) |
| Max. range: 3 feet (75 cm) |
|
|
Accessories | 120V AC Power adapter (400mA/12V DC adapter, |
| Mounting kit (Plate and 4 screws) |
|
|
Approvals | The device complies with part 15.19(a)(3) of the FCC Rules. |
| Operation is subject to the following two conditions: (1) this device |
| may not cause harmful interference and (2) this device must accept |
| any interference received including interference that may cause |
| undesired operation. |
| Philips Consumer Electronics Company, |
| Knoxville, Tennessee 37914 – 1810 U.S.A. |
User Guide |
8
