Installation
Mounting
The RF Extender can be mounted to a piece of furniture using the included mounting plate and the 4 screws. Take into account the range and the working angle of the IR blaster as explained on p. 3. Also make sure to place the
RF Extender in a central position aimed directly at your devices.
Warning It is adviced not to place the RF Extender inside or near a metal closet as
RF signals can be disturbed by metal objects.
1Remove the mounting plate from the bottom of the RF Extender.
2Screw the plate to a rack, closet or another piece of furniture. Provide sufficient space to connect the power adapter and to slide the RF Extender back on.
Note | Depending on the surface, it may be possible to attach the RF Extender to the |
| furniture using a piece of |
| there is sufficient space. |
3 Slide the RF Extender on the mounting plate.
Using the Dual IR Emitters
Like the IR blaster of the RF Extender, the dual IR emitters send out IR signals.
You can use the dual IR emitters as an alternative for the IR blaster.
When to use the emitters
The IR emitters can control devices the IR blaster cannot reach, for instance when there is limited space around the receiving eyes of the devices, e.g. in a small closet.
Note | The IR emitters can also be used in combination with the IR blaster of the |
| RF Extender. Both send out IR signals simultaneously. This allows you to operate |
| several devices using both the IR blaster and the IR emitters. |
User Guide |
|
| 4 |