Philips RFX600099 manual Installation, Working Angle and Range of the IR blaster

Installation

Installation

The following components should be present: RF Extender, power adapter, 4 dual IR emitters, mounting plate and 4 screws.

Before you install the RF Extender, you should decide which of the set-ups described on p. 2 apply to your needs. It is recommended to read through the entire User Guide.

Working Angle and Range of the IR blaster

Warning The IR signals sent out by the RF Extender always have to be able to reach the receiving eyes of your devices. Make sure that the IR blaster (dark plastic window on top of the RF Extender) is aimed at your devices.

To get optimal results, it is recommended to place the RF Extender horizontally with the IR blaster facing up or down.

Minimum distance:
4 inches (10 cm)
	Maximum distance:
	Approx. 16 feet (5 m)
Figure 1: IR blaster facing down	Figure 2: IR blaster facing up

Figure 1 represents the RF Extender mounted up side down inside a closet. Always maintain a minimum distance of 4 inches (10 cm) between the RF Extender and your devices.

Figure 2 represents the RF Extender with the IR blaster facing up. The RF Extender can be placed at a distance and higher than your devices. Make sure there are no objects between the RF Extender and the receiving eyes of the devices.

User Guide

3