RFX9400 Starter’s Guide

3Open the ProntoEdit Professional on the PC.

4In the Tools menu, select Extender Discovery.

The Extender Discovery tool appears, with a list of all the detected Extenders in the Pronto Network.

5Select the Extender that you want to configure and click on the Configure button. The Configuration Tool opens in the browser.

6Select Firmware Update in the left navigation pane. The Firmware Update page opens.

7Follow the onscreen instructions.

ENGLISH

Specifications

The specifications and design of this product are subject to change without notice.

General

Dark grey ABS housing with poly carbonate front plate

 

802.11 b/g compliant RF technology

 

4 LED indications for Power, WiFi, Network and Busy

 

Up to 16 extenders and 16 control panels in a system (for all modes)

 

4 addressable outputs for IR emitters

 

Ethernet RJ45 connection

 

Rotatable RF antenna

 

Positioning: freestanding or mounted in any position

 

 

Modes

Stand-alone (wireless): Similar to WiFi ad-hoc mode; no access point and

 

router required

 

Network (wireless): Similar to WiFi infrastructure mode; used in a system with

 

a router and access point

 

Network (wired via Ethernet): used in a system with a router and access point

 

 

Dimensions

3,98 x 6,18 x 1,3 inch (101,2 x 157 x 33,5 mm)

 

 

Operating temperature

32°F to 122°F (0°C to 50°C)

 

 

Infrared (IR)

IR frequency range: 25kHz-1MHz (including DC/flash codes)

 

IR power out: 2 levels

 

 

Radio Frequency (RF)

802.11g at 2.4 GHz with additional proprietary protocol

 

 

Dual IR emitters

Number of IR emitters: up to 4 (2x2), emitters wired in series

 

0.13 inch (3.5 mm) mono mini-jack

 

Cable length: 9 ft (2.7 meters)

 

 

Mono mini-jack cables

0.13 inch (3.5 mm) mono mini-jack

 

Cable length: 5 ft (1.5 meters)

 

 

Power adapter

100V-240 VAC / 50-60 Hz Power adapter (5V DC/2A output, UL-CE approved)

 

 

Pronto Wireless Extender Starter’s Guide

© Copyright 2006 Royal Philips Electronics, Interleuvenlaan 72 - 74, 3000 Leuven (Belgium)

Remarks:

All rights are reserved. Reproduction in whole or in part is prohibited without prior consent of the copyright owner. Royal Philips Electronics is not liable for omissions or for technical or editorial errors in this manual or for damages directly or indirectly resulting from the use of the Pronto Wireless Extender.

The information in this Starter’s Guide may be subject to change without prior notice.

All brand or product names are trademarks or registered trademarks of their respective companies or organizations.

10

Page 13
Image 13
Philips RFX9400 manual Specifications, Pronto Wireless Extender Starter’s Guide, Remarks