Philips RU641/87 manual SET-UP for USE, Your equipment is a Philips brand, V i c e, E c k, T e

XP SBC RU 641/87 15-10-2001 12:49 Pagina 4

English

VCR SAT

TVDVD

Instructions for use

SET-UP FOR USE

A d v i c e

Carefully read the complete procedure before starting!

Your equipment is a Philips brand:

1 Press the mode selector key for the device you want to operate.

2 Press the power key to test.

–The green indicator LED under each device (TV, VCR, SAT or DVD) lights up to confirm the mode you’re in.

VCR SAT

TVDVD

13

1 - 9

VCR SAT

TVDVD

1 3

C h e c k

Press a few keys to check correct response.

Your equipment is of another brand, or your equipment is a Philips brand, but not all keys respond correctly:

1 Press the mode selector key to select the device (TV, VCR, SAT or DVD) you want to operate.

2 Look up the brand name of the device you want to operate in the code list (centre of this manual).

Make sure you choose the correct code list for your device!

3 Make sure the device is switched on.

4 Press and hold keys 1 and 3 simultaneously - for about three seconds- until the green LED lights up. (Release the keys: the green LED should stay on)

5 Enter your 4-digit code using the number keys, within

30seconds.

–The green LED flashes twice.

C h e c k

That’s it! Press a few keys to check correct response. If response is not correct, repeat procedure beginning at step 1.

N o t e

-If the LED displays one long flash, the code was not recognised. Please go back to step 1 and repeat the procedure, using the next 4-digit code in the list.

-If no key is pressed within 30 seconds, you have to start again at step 1.

A d v i c e

Carefully read the complete procedure before starting!

You do not know the brand of your equipment/you can not find the right code in the code list » auto search:

1 Press the mode selector key to select the device (TV, VCR, SAT or DVD) you want to operate.

2 Make sure the device is switched on (if the device is a VCR, please insert a tape and start playback).

3 Press and hold keys 1 and 3 simultaneously -for about three seconds- until the green LED lights up. (Release the keys: the green LED should stay on)

4