Philips SBC RU641/87 manual Punch-Through Sound, Functional back-lighting

XP SBC RU 641/87 15-10-2001 12:49 Pagina 7

Instructions for use

Punch-Through Sound

Punch-through sound enables you to control the audio level of your first or second TV, regardless of what device mode the remote control is in.

EXAMPLE:

You have installed a second TV under SAT mode. You can control that TV’s volume when you are in VCR mode. This feature is installed as a default setting for a first TV.

To install this feature for a second TV:

	VCR	SAT		1 Press the mode selector key to select VCR.
	TV	DVD
	1	6		2 Press and hold keys 1 and 6 simultaneously -for about 3
				seconds- until the green LED lights up.
9	9		3	3 On the keypad, press keys 9, 9, and 3.
				4 Press the mode selector key to select SAT (second TV).
	VCR	SAT
	TV	DVD		5 Press the power key.

–That’s it! The LED flashes twice to indicate successful set up.

The Volume up/down keys now control the volume of your second (SAT) TV when you’re in VCR mode.

English

Functional back-lighting

When you pick up the SBC RU641 and tilt it over about 60 degrees, the main keys for the device you want to operate are automatically back-lit.

In VCR mode for example, only the main keys that are needed to operate the VCR are back-lit.

You can choose to have all of the keys back-lit, or you can switch off the functional back-lighting feature completely.

To back-light all of the keys:

19 • Press keys 1 and 9 simultaneously -for about 3 seconds- until the green LED flashes twice.

–The functional back-lighting is now de-activated and all keys light up when you pick up the remote control.

Pressing keys 1 and 9 simultaneously again -for about 3 seconds- will return the back-lighting to its preset functional setting.

N o t e

The back-lighting turns off if you don’t move the remote control or if you don’t press a key within 4 seconds.

7