Philips RU641/87 manual Troubleshooting Guide, To remove the back-lighting completely, Solution

XP SBC RU 641/87 15-10-2001 12:49 Pagina 8

English

Instructions for use

T i p

The automatic back-lighting provides you with unparalleled ease of use, even in the most dimly-lit of rooms. While the remote control is actively being moved about the back- lighting stays on. This consumes more power than normal and may require you to change your batteries more frequently. You can easily turn the back-lighting function off to conserve power. To do this please follow the instructions below.

To remove the back-lighting completely:

79 • Press keys 7 and 9 simultaneously -for about 3 seconds- until the green LED flashes twice.

–The back-lighting is now de-activated.

Pressing keys 7 and 9 simultaneously again -for about 3 seconds- will return the back-lighting to its preset functional setting.

TROUBLESHOOTING GUIDE

•Problem:

– Solution:

•Device is not responding and the green light does not flash when you press a button.

–Replace batteries with two new 1.5 volt, type RO3, UM4 or AAA batteries.

•Device is not responding, but the green light does flash when you press a button.

–Aim the SBC RU641 at the device and be sure that there are no obstructions between the SBC RU641 and the device.

• The SBC RU641 is not performing commands properly.

–You may be using the wrong code. Try repeating Set up using another code, listed under your brand, or start the Autosearch

Set-up over again to locate the proper code.

If the device still doesn’t respond, call the help-line and we’ll put you back on track.

• The SBC RU641 drains batteries more frequently.

–While the remote control is actively being moved around the back-lighting stays on. This consumes more power than normal and may require you to change your batteries more frequently. You can easily turn the back-lighting function off to conserve power. To do this please follow the instructions in the backlighting section.

•You can’t access teletext pages and you were used to use this (fi) button to access teletext.

– Follow Set up procedure and at step 5 of section “Your

0equipment is of another brand, or your equipment is a Philips

0brand, but not all keys respond correctly” press keys

60, 0, 6 and 4. To enter teletext pages, press the subtitle

4 button.

8